Feature

■ Two sensor probes connectable

Choose the best probe for your purpose, as we offer a variety of interchangeable probes. Note that one probe must be purchased separately at least.

■ IP65 dustproof/waterproof

SK-L751 conforms IP65 if the following conditions are met;

- Either one or two of cord probes SK-L751-2/21/22/23/24/25/31/32 are connected

- AC adapter is not used

■ Memorizes up to 16000 data

Available to record data for 4 hours with a logging interval of 1 second and for as long as 2 years and 9 months with an interval of 90 minutes.

* Maximum number of data x logging interval = maximum logging time. E.g., 16000 x 5 sec. = 22.2 hours

■ No data loss even if battery runs out

Data is securely stored in the memory to avoid losing even if there is a power failure.

■ AC/DC input compatible

This product functions well with batteries, however, it is recommended to use AC inlets for measurement in a long duration.

When the AC adapter is connected while the batteries are installed, power is supplied from AC inlet preferentially, and it switches to using the batteries in case of a problem such as blackouts.

■ Data can be copied to PC and micro SD

Logged data can not only be downloaded to a PC but also be copied to a micro SD card (sold separately). Copying can be done even when logging.

■ Data analysis software attached

Logged data can be fully utilized such as by graph plotting and real-time display. It can be also exported in CSV format to open it in a spreadsheet system.

■ Four logging mode options selectable

- Once (default)

Keeps logging until the memory becomes full. Stops logging when 16000 data are recorded.

- Repeatedly (overwriting)

Overwrites the existing data from the beginning once the 16000 data are recorded. Ideal for the case you only need to store data of the latest period.

- Ends at (limited amount)

Stops logging when the number of data reaches the limit you set. Ideal for limiting the amount of data to be collected.

- By page (partitioning)

Partition the memory into four blocks, each having the capacity to store 4000 data. Once you stop logging and restart it the data is stored in the next block, thus it is convenient to sort and manage the data of different time or locations.

■ Fourteen different logging intervals

Available logging intervals: 1, 2, 5, 10, 15, 30 seconds and 1, 2, 5, 10, 15, 30, 60, 90 minutes.

■ Scheduled logging

Available to preset the time to start logging automatically.

■ Key lock function

Prevents misoperation while in logging or in standby for preset start.

■ Warning display for upper and lower thresholds

An alarm light is lit and Hi/Lo indicator blinks if the temperature exceeds or falls below the preset thresholds. The light and the indicator turn off when the measured value falls back within the range of the set values.

■ ID number for each device

A 6-digit ID number can be set for easy identification when multiple loggers are used.

■ °C/°F switchable

Description

■ Features of attached analysis software

Main window

Configures the settings for the main unit, downloads measured data, and analyzes it.

- Both the logged data in the main unit and the data copied to a micro SD (sold separately) can be downloaded.

- Up to ten units can be controlled using a USB hub.

- Imported data can be zoomed in and out, plotted, exported, printed, and analyzed in various ways such as partial analysis and integral analysis.

- Exporting the data in CSV format enables other spreadsheet software to edit it.

Real-time monitoring

Displays measured data in real-time chart when the main unit and the PC are connected with a communication cable.

- Updates current value, maximum, minimum, average, WBGT value, and alarm information in real time.

- Up to ten units can be monitored simultaneously using a USB hub if all units are the same model. These units must be all SK-L751 (temperature type) or all SK-L754 (temperature/humidity type).

- Graph plotting and exporting are available during monitoring.

- Alarm for Hi/Lo thresholds, WBGT, and battery shortage are available. It has also an option to send email to a preset address when alarm is activated.

* Windows PC only

■ Requirements for attached analysis software

"Datalogger for Windows"

OSWindows 8.1, 10, 11 (32/64 bit)with latest service pack installedMemory4 GB or more (32 bit), 8 GB or more (64 bit)HDD4 GB or more free spaceOther

USB port, CD-ROM drive, and if alarm email is used, internet connection and email address are required.

The latest version of the software can be downloaded from our website.

‍