Shimadzu AP224Y Analytical Balance 220G Capacity
Shimadzu analytical balances boast a one-piece UniBloc weighing sensor, which is now even more advanced. The improved UniBloc sensor offers up from 7 seconds (previous model) to 1.5 seconds faster response.
A new ionizer is able to remove static electricity in about 1/10 the time of previous ionizers
This unit allows acquisition of reliable weighing results by eliminating static electricity that can affect measurements without scattering powder.
Equipped standard with an RS232C connector, a USB device and a USB host. You can now simultaneously send output to both a computer and printer or connect a USB flash drive, a barcode reader, or an external numeric keypad.
Display capture function
Weighing display can be recorded into USB memory in BMP format. User name, date/time, setting can be done with display information.
Numeric keypad
Connecting a common external numeric keypad makes it easier to enter numeric values. This is especially useful for entering the mass value of weights, setting upper/lower limit values for the comparator function, or entering the sample count during piece counting mode.
Barcode reader
A barcode reader can be connected. Simply reading a barcode makes it possible to input user ID/Password. It is possible to manage sample IDs using barcodes.
Periodic Inspection Support Function (APW/APX only) NEW
AP series supports periodic inspections. The function allows inspection of repeatability, corner load error, and linearity by simply following instructions displayed on the screen.
Neraca Analitik Shimadzu AP224Y, 220g x 0.0001g, ext CAL
Model: AP 224Y
Capacity: 220 g
Minimum Display: 0.1 mg
Calibration Weight: None
Repeatability (at weighing capacity): 0.1 mg
Repeatability (for Low Loads): 0.1 mg (for 10 g load
Minimum Weight: 200 mg
Linearity: ±0.2 mg
Response Time: 2 sec
Operational Temperature/ Humidity Range: 5 to 40 °C at 20 to 85 % RH
Sensitivity Stability Against Temperature Range: ±2 ppm/°C (10 to 30 °C)
Pan Size: Approx. 91 mm dia
Body Dimensions: Approx. W212 × D367 × H345 mm
Weight: Approx. 6.5 kg
Display: OEL display (dot matrix)
Rated Electric Power Supply: DC 12 V 1.0 A
Power Supply Input (AC Adapter): AC100-240 V, 0.32 A 50/60 Hz
Input/Output Termina: RS-232C (D-sub 9P plug) USB device (Type B)