Shimadzu AP324X Analytical Balance 320G Capacity
Shimadzu analytical balances boast a one-piece UniBloc weighing sensor, which is now even more advanced. The improved UniBloc sensor offers up from 7 seconds (previous model) to 1.5 seconds faster response.
A new ionizer is able to remove static electricity in about 1/10 the time of previous ionizers
This unit allows acquisition of reliable weighing results by eliminating static electricity that can affect measurements without scattering powder.
Equipped standard with an RS232C connector, a USB device and a USB host. You can now simultaneously send output to both a computer and printer or connect a USB flash drive, a barcode reader, or an external numeric keypad.
Display capture function
Weighing display can be recorded into USB memory in BMP format. User name, date/time, setting can be done with display information.
Numeric keypad
Connecting a common external numeric keypad makes it easier to enter numeric values. This is especially useful for entering the mass value of weights, setting upper/lower limit values for the comparator function, or entering the sample count during piece counting mode.
Barcode reader
A barcode reader can be connected. Simply reading a barcode makes it possible to input user ID/Password. It is possible to manage sample IDs using barcodes.
Periodic Inspection Support Function (APW/APX only) NEW
AP series supports periodic inspections. The function allows inspection of repeatability, corner load error, and linearity by simply following instructions displayed on the screen.
Model : AP324X
Capacity: 320 g
Minimum Display: 0.1 mg
Calibration Weight: Built-in
Repeatability (at weighing capacity): 0.15 mg
Repeatability (for Low Loads): 0.1 mg (for 20 g load)
Minimum Weight: 200 mg
Linearity: ±0.3 mg
Response Time: 2 sec
Operational Temperature/ Humidity Range: 5 to 40 °C at 20 to 85 % RH
Sensitivity Stability Against Temperature Range: ±2 ppm/°C (10 to 30 °C)
Pan Size: Approx. 91 mm dia
Body Dimensions: Approx. W212 × D367 × H345 mm
Weight: Approx. 7.0 kg
Display: OEL display (dot matrix)
Rated Electric Power Supply: DC 12 V 1.0 A
Power Supply Input (AC Adapter): AC100-240 V, 0.32 A 50/60 Hz
Input/Output Termina: RS-232C (D-sub 9P plug) USB device (Type B) Ionizer